DIY Customized Helmets

photo 1

When I was in derby, my desire to customize pretty much everything I own found a nice snuggly spot in helmets.  Derby girls often decorate their helmets in all kinds of awesome stickers and artwork, so I started making custom helmets for the ladies (and dudes) on my team.  My favorite (and the quickest) way to decorate helmets is with paint pens, which you can get at any craft or art store.  Get lots of them, because they run out of paint quickly, and sometimes you get duds that don’t work well.   Thick point is best–fine-lines pens will take FOREVER.  But don’t get those ones with the mega-marker tips, or you won’t be able to get ANY detail in there.

First off, if you’re working with an older helmet, clean off any dirt or residue from the helmet.  No sticker goo.  Rubbing alcohol works well for this.  New helmet, no problem, just wipe it down a little and get started.  Glossy helmets work best.  You can paint on a matte helmet, just be warned that when you spray it with sealant at the final step, it will most likely turn a little glossy, so if you’ve got your heart set on a matte-looking helmet, you can choose to leave off the final spray…it’ll just not stay on as long and probably need some touch-ups.  I usually like to print references to look at while I work, and doodle it on freehand.  Sometimes I’ll find a fancy font and print out what I want, and then freehand it using the printout as a reference.

photo 1

I’ve done lots of helmets this way, using simple color combos, varying shades of paint pens.  Sometimes when they get older, pen paint changes color a little, and you can get two shades of the same color (as in the celtic clover above).  Often, the person I’m doing it for will give me a rough idea of what they have in mind, but usually they just let me go crazy with ’em.  Since skate helmets are around $35,  and you have to replace them now & then, it allows players to have options in the helmets they wear.  Some will wear certain ones to practice and others to bouts, etc.

If you mess up while you’re painting with the paint pens, you might be able to salvage it with a paper towel soaked in rubbing alcohol.  Usually, it’ll wipe away oil-based paint pens pretty easily, and allow you to correct your mistake.

photo 3

I usually put the players’ name on the right side of the helmet (facing the crowd, in a bout), and the fun design on the left, facing in.  Sometimes I’ll put the number on there somewhere (back or side).  Some ladies prefer the numbers off….not that it has anything to do with being less visible to the refs or anything.  🙂

photo 2

I’ve also handpainted a few helmets, although this requires MUCH more work.  I use acrylic paints for them, and go to town.  Handpainting allows for much more detail and artistic license, but honestly, is a little too “fine” for derby, which can really bang up a helmet.

Whether you handpaint a helmet or use paint pens, your best bet for durability is to finish it with SEVERAL coats of acrylic gloss varnish, which you can get anywhere that sells spray paint.  It’s a clear gloss spray that “seals” the helmet in a coat of varnish to protect it.  Be warned: I have had some problems with spray paint underpainting or acrylic handpainting warping and bubbling with some sprays, and I’ve never found a rhyme or reason why (never had a problem spraying over paint pens, though).  After you’ve sprayed your helmet evenly and completely, let it dry, then spray it again….and again…and again.  Hopefully, that’ll be enough to protect it through at least one bout!  But hey–they look good all scratched up, too….  🙂

10 responses

  1. Hi, a quick question. Is it posaible to place an order for a helmet with customisation for and order to he uk? And how long does it usually take?



    1. Hi there! I don’t usually do custom orders…but I have done a few for friends now & then. I don’t have a professional studio for helmets or anything, so I don’t put any hardcore guarantee on them–mainly did the post to show others what I’ve learned in doing them myself. If you’d like to tell me more about any ideas you have in mind, please email at

  2. These are gorgeous! I’m about to paint my derby helmet to go with my name new name and number, ” Dex-Her Morguen, #M99″ and was looking to see what others use.

  3. Oh yes, lovely work, too! 😀

  4. What brand of paint pen do you use and where do you get them?

  5. Leanne Silvester | Reply

    This is epic can you provide me costs to do my helmet please ?

    1. Thank you! I don’t do many customs anymore, but I wanted to share the info so that other people could do their own helmets. I hope it helps!

  6. Hey so I’m entering a gloss built well helmet into a bike show and I have never painted one do I need to put a primer down on first or does it stick good enough with the finishing spray and also is there ways to erase mess ups? If you could e mail me back that would be great

    1. Many people sand it first. I didn’t prime mine–they weren’t going to get a TON of wear & tear, hopefully. Main thing is putting several coats of gloss varnish on afterward. Depends on what you’re painting with, but rubbing alcohol erases most problems. Hope that helps!

  7. What brands of paint pens and spray varnish do you recommend?

Leave a Reply to Pinky Fingaz Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: